Sameday & next day despatch
Reliable, trustworthy & experienced
5 star rated
customer service
Competitive pricing, high quality products
3 Layer for Waterproof Fabrics Sportswear Ski Snow Gear ,Raincoat ,Outdoor Jacket , Surface Drysuits.
Application:
Choose "nylon" (polyester) setting on the iron with No Steam
For small thing repairing and patching, please apply with a Heat Press or Household Iron. The temperature needs to be set on a medium / medium hot, and the time is suggested to be 6-10 seconds with pressure applied.
Ideally apply the Tape to a small piece of waste fabric first to test adhesion strength. After test application and allowing time for cooling, pull the tape back, and you should feel a resistance and normally the tape should remove some of the waterproof coating.
For a good seal to be achieved, the temperature must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the tape.
Additional information
| Weight | 0.012 g |
|---|
Only logged in customers who have purchased this product may leave a review.





Reviews
There are no reviews yet.